Reverse Osmosis Water Filter Maintenance Tips

When it comes to water treatment, we can only trust the best. Reverse osmosis water filter systems are one of the most effectual and preferred water purification units around.

The water purification technology in RO water filters goes beyond the abilities of typical water filtration units. It uses a semipermeable membrane to remove contaminants and unwanted particles from drinking water.

water filter

While efficient RO water purifiers can last for years, it takes good maintenance to make them perform at their peak efficiency for a long time.

Having said that, the following are some cleaning and maintenance tips that will help ensure smooth function and durability of your RO water filter system.

When to clean?

While it is recommended to clean your water filters on a regular basis, there are particular signs that indicate towards the urgent need for maintenance or replacement.

  • When the normal water flux decreases.
  • When typical salt content increases.
  • When the water pressure decreases.

It is usually advised that you clean your RO water filter regularly and closely monitor the system and note the changes in values if any.

How to go about changing filters?

Every reverse osmosis filter’s owner’s manual includes specific time intervals at which cleaning and maintenance operations should be performed. Scheduled filter changes may have three, four or five stages. So, it is important to monitor at what stage each filter is as per your owner’s manual and pay attention to when the filters are due for replacement.

Sediment Filter: 

Your sediment filter should be changed out every 6 months. This filter is designed to prevent sediments and dirt getting to the delicate RO membrane. Change your sediment filter every 6 months.

Carbon Filter: 

The function of carbon filter is to remove chlorine and other contaminants that affect taste and odour of your water as well as the performance and life of the RO membrane. Consider replacing this filter every 6 months.

Reverse Osmosis Membrane: 

The semi-permeable membrane is equipped in your RO system to allow water through while filtering out additional contaminants. If you replace carbon and sediment filters at scheduled intervals, the RO membrane need not to be replaced before two to three years. Moreover, the replacement schedule may vary based on the quality of drinking water and household water consumption.

Failing to maintain or replace filters at scheduled intervals will not only affect the operation of your RO water filter, but it will also take a toll on the quality your drinking water and your health.

CONCLUSION

We, today, live in a pollution-ridden, highly toxic atmosphere where consuming clean and purified drinking water is an inevitable necessity. RO water purifiers are one of the best means to ensure the availability of pure, germ-free drinking water.

If you’re using a RO water filter at your home, make sure to clean and maintain the filtration system as specified in the user’s manual. While you can maintain your RO water filter using the instructions given in manufacturers’ guide, we recommend hiring a professional to ensure proper service and maintenance.

Signs You Need to Switch to a New Water Filter System

As common a source is tap water for people across Australia, we can’t deny the fact that it is not the cleanest and safest source to meet your drinking water needs.

water-filter

Most people in Australia grow up drinking tap water because they consider it clean and safe to drink. Regional water authorities clean the water through an industrial water treatment process before supplying it to residential properties.

But this is precisely the problem. The significant use of chlorine and fluoride in drinking water by water authorities to make it germ free and health-friendly actually makes it unsafe to drink. And that is why water filter systems are an inevitable necessity for every home.

However, installing a water filter in your home isn’t enough. You must make sure it is in good working condition in order to ensure a constant supply of safe and clean drinking water.

Listed below are signs that indicate toward improper function of a water treatment system and the need for a replacement.

➤ Reduced water pressure

An effective water filter is supposed to remove contaminants and impurities in drinking water to make it safe for drinking. If you notice low water pressure in your home, it is likely that the filters of your water treatment system aren’t doing their job properly.

➤ There are sediments in your glass of water

Of course, that’s a clear indication. If you can spot dirt or particles of impurities in your drinking water or notice lines around your glass and dirt in the basin, the system needs to be replaced.

➤ Clogged pipes

Often piped get clogged with the stuff that you put down your drains like food residues, hair and other things that belong in the dustbin. But when there’s a blockage caused by unfiltered poorly filtered water entering the pipes, it isn’t ways to clear the way using plunger or any sharp tool. You will either need to change the filters or replace the entire system as required.

➤ An unfamiliar taste or smell

If the colour, odour or taste of your drinking water changes suddenly, it is a sign that your filter system might not be working properly.

Conclusion

water-filters-australia-conclusion

It’s not like a red light button will start blinking when your water filter becomes infective or its parts wear out. A water filter system is supposed to filter water while removing harmful contents and contaminants present in it. When the system t is used beyond its life expectancy, it will automatically stop its function and you can easily notice from the quality of your water.

Whether you wish to replace your worn out water filter or need to buy a new one, there are endless choices for water filtration solutions in the market. To end up finding an efficient water treatment unit, make sure to buy from a reliable seller in Australia.

Author

Filter Systems Australia